Mains Switch Removal (Integrated) - Miele G2000 Technical Information

Technical Information
5.5.1

Mains Switch Removal (Integrated)

1. Fascia panel removal (5.2.4).
2. Remove the screws from the sides of the door inner panel.
3. Remove the middle screw from the top of the door inner panel.
4. Tilt the holding plate to the front.
Note
If the dishwasher has a furniture front, take care to insert a towel or
similar between its top edge and the fascia to prevent the risk of
scratching.
5. Disconnect all plugs.
Fig. 5-40: Mains Switch Removal
6. Press in the retaining lugs; see Fig. 5-40, Pos 1.
7. Slide the mains switch upwards, see Fig. 5-40, Pos.2, and remove it from its
holder.
Note
When refitting the holding plate, make sure that the electronic unit protective
foil is pulled down at the bottom so that it is below the plug area.
G1000 / G2000 Dishwashers
104