Miele G2000 Technical Information page 173

G1000 / G2000 Dishwashers
Options
Refer to Tables: 6-44 through 6-48.
Function
Pos. 1: Reset
Pos. 2: Language
setting
Pos. 3: Time of
day setting
Pos. 4: Tab type
or detergent
1)
setting
Pos. 5:
Dispensed rinse
aid quantity
setting
Pos. 6: Interval
between filter
checks setting
Table 6-44: G2630 Programming Mode Options (Continued on Table 6-45)
Programming
Use the cursor buttons as
appropriate to select Reset,
then press the OK button. Use
the cursor buttons to make the
desired setting.
Use the cursor buttons as
appropriate to select
Language, then press the OK
button. Use the cursor buttons
to make the desired setting.
Use the cursor buttons as
appropriate to select Time...,
then press the OK button. Use
the cursor buttons to make the
desired setting.
Use the cursor buttons as
appropriate to select Tab type
or Detergent type (from
software version ID no.984),
then press the OK button. Use
the cursor buttons to make the
desired setting.
Use the cursor buttons as
appropriate to select Rinse aid,
then press the OK button. Use
the cursor buttons to make the
desired setting.
Use the cursor buttons as
appropriate to select Check
filters, then press the OK
button. Use the cursor buttons
to make the desired setting.
173
Technical Information
Display
This programmable function can
be used to reset all parameters
(both customer and service
programming) to the standard
settings.
The display shows the available
options.
Display options: 24 h Clock or 12
h Clock. After selection, the
display changes to the
appropriate time indication.
The display shows the following
options for the detergent type:
Normal (powder detergent) 2 in
1, 3 in 1 or Liquid detergent
(from software version ID no.
984).
The display shows the current
rinse aid dispensed quantity
setting. Setting range: 0 ml – 6
ml. Standard setting: 3 ml.
The display shows the number of
wash programs between filter
checks. Setting range: 30 – 60
wash programs.