Table of Contents
Advertisement
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Function Programming
Intake/Drain
Lt.
Long Short
Pos. 12:
Resetting
standard
settings *1
1
2
Long Short
Pos. 20:
Wash
temperatu
re
modificatio
n (from
2
-
software
version ID
No. –984)
Long Short
Pos. 22:
Program
running
time
reduction
(from
software
2
2
version ID
No. –984)
Table 6-18: G2140 Program Mode Options (Cont. from Table 6-17) (Cont. on Table 6-19)
Press the
The Rinse LED is off
Program button
or flashes. This
12 times. The
programmable
function can be used
Rinse & Hold
LED flashes once
to reset all
slowly and 2 times
parameters that can
rapidly
be modified by the
customer to the
intermittently.
Press the
standard settings: P0
Start/Stop button
= Non-standard
to reset all
settings have been
standard settings.
made; P1 = All
settings reset to
standard settings or
no modifications have
been made.
Press the Program
The Rinse LED is off
button 20 times.
or flashes. Setting
The Rinse & Hold
options: P0 =
LED flashes 2
Standard setting; P1
times slowly
= Wash temperature
intermittently.
increased. Due to a
Press the
program-dependent
Start/Stop button
running time
as appropriate to
extension, the wash
make the desired
temperature will be
setting.
increased.
Press the Program
The Rinse LED is off
button 22 times.
or flashes: P0 =
The Rinse & Hold
Standard setting; P1
LED flashes 2
= Program running
times slowly and 2
time reduction.
times rapidly
intermittently.
Press the
Start/Stop button
as appropriate to
make the desired
setting.
131
Flashing Rhythm of
Display
Sani-Wash Lt.
Long Short
-
-
Long Short
-
-
Long Short
-
-
Technical Information
Display
-
P0
1
P1
Display
-
P0
1
P1
Display
-
P0
1
P1
Advertisement
Table of Contents
