Table of Contents
Advertisement
G1000 / G2000 Dishwashers
Control
Dial
Function
Position
11 o'clock
Pos. 36:
Machine
height
setting *2
Pos. 38:
Model
variant
setting *2
Pos. 39:
Country
variant
setting *2
Table 6.6: G2020 Programming Mode Options (continued from Table 6-5)
Warning!
Do not change settings in Position 36, 38 or 39. Any changes made will
affect the operation of the dishwasher.
Programming
To move through
Options: Rinse LED
the levels, turn the
is off = standard
control dial to the
machine height
11 o'clock position.
(G1xxx); Rinse LED
Press the
flashes = XXL units
Start/Stop button
(G2xxx)
5x. Turn the control
dial to 9 o'clock
position. To change
the setting, press
the Start/Stop
button.
To move through
Options: Rinse LED
the levels, turn the
is off = models with
control dial to the
UKT: Gx04x; Rinse
11 o'clock position.
LED flashes =
Press the
models without
Start/Stop button
UKT: Gx02x
6x. Turn the control
dial to 3 o'clock
position. To change
the setting, press
the Start/Stop
button.
To move through
The flashing rhythm
the levels, turn the
of the LED Rinse
control dial to the
shows which
11 o'clock position.
country version is
Press the
programmed: 1x =
Start/Stop button
EUR (Europe); 2x =
6x. Turn the control
AUS (Australia); 3x
dial to 5 o'clock
= USA, 4x = JPN
position. To change
(Japan), 5x = I/E
the setting, press
(Italy/Spain), 6x =
the Start/Stop
SER (Southern
button.
Europe) *3
111
Flashing Rhythm of
Display
Rinse LED
Long
-
Long
-
Technical Information
Short Display
-
-
Short Display
-
-
Advertisement
Table of Contents
