Miele G2000 Technical Information page 186

Technical Information
Function
Water-Plus quantity
normal / increased
Sensor softener
activation /
deactivation, water
hardness manual
setting
Program running
time reduction
(from software
version ID no. -984)
Second interim
rinse selection
(from software
version ID no. 984)
Machine height
setting *1
Country variant
setting *1
Model variant
setting *1
Table 6-52: G2670 Programming Mode Options (Continued from Table 6-51)
*1 If the electronic unit is exchanged during service work, it must be programmed as
follows: First set the country variant and model variant, then switch off the unit,
repeat the accessing procedure and set the machine height.
*2 The SER variant includes the following countries: Portugal, France, Netherlands,
Belgium and Great Britain.
*3 From software version ID no. 984 the display Tab type has been superseded by
Detergent type.
Save and quit
Switch off the unit.
Programming
Select Water plus. Make the
desired selection and confirm
with the OK button
Select Water hardness. Make
the desired selection and
confirm with the OK button
Select Shorten the program.
Make the desired selection and
confirm with the OK button.
Select 2nd interim rinse. Make
the desired selection and
confirm with the OK button
Select Appliance height. Make
the desired selection and
confirm with the OK button
Select Country version. Make
the desired selection and
confirm with the OK button
Select Model type. Make the
desired selection and confirm
with the OK button
186
G1000 / G2000 Dishwashers
Display
The display shows the options
Normal and Increased
Automatic = sensor softener
activated. Alternatively the on-site
water hardness can be directly
selected. Setting range: 1°d to 70°d
(°d = Degree of German hardness).
The display shows the options On
and Off (standard setting). This
offers a program dependent running
time reduction by reducing
temperatures and/or canceling
holding times.
The display shows the options On
and Off (standard setting)
The display shows the options
Normal (G 1xxx) and XXL (G2xxx)
Setting options: EUR = Europe,
AUS = Australia, USA, JPN =
Japan, I/E = Italy/Spain, SER =
Southern Europe *2
On models with salt container in the
door (SIT) (e.g. G1870, G2870) this
option must be set to VI7. If the
dishwasher does not have a salt
container in the door (SIT), VI5
must be selected.