Rc400 Remote Control - Leica Rugby 640 User Manual

2.5
Description
RC400 Remote
Control panel
Description of the
Buttons
Rugby 640, Description of the System

RC400 Remote Control

The RF Remote Control communicates with the Rugby via RC (radio) and is used to
control the same functions as on the laser.
a
b
c
d
e
f
004794_001
Button Function
Scan Mode Press to change width of the scanning motion.
Left and Right Press to tilt the Y-axis when it is in Manual Mode. In the laydown
Arrow position press to align the vertical plane and 90° split beam.
Up and Down Press to tilt the X-axis when it is in Manual Mode.
CW and CCW Press to rotate the stationary and scanning beam in a clockwise
or counterclockwise motion.
Scan 90° and Press to quickly move the scanning or stationary beam at 90°
Scan Memory intervals. In Scan Mode the scan width will automatically change
to the smallest scan width when this function is activated.

Head Speed Press to change the speed of the head rotation.
Automatic/ Press to change desired axis to Manual Mode.
Manual Mode
Beam down Press to stop the rotating head (zero rps). The position of the
beam will move to the downward position to allow the user to
align the Rugby over a reference point on the floor.
Sleep mode Press to put the Rugby in sleep mode.
• During Sleep Mode all functions are disabled.
• The Low battery indicator flashes once every ten seconds to
• The Rugby will sleep for two hours, then shuts down auto-
• When in Sleep Mode pressing the sleep button will wake the
Sending LED:
The sending LED flashes to indicate that the remote is sending a signal to the Rugby.

The remote control is powered by a 2x AA batteries. replacement is the same
as for the Rod Eye receivers.
g
c
h
e
i
j
Scan Memory means that you can switch to rotational or
stationary mode and the scan will return to the previous
position when scanning motion is chosen again.
indicate the Rugby is in Sleep Mode.
matically and must be turned on again at the laser.
Rugby and normal operation resumes.
a) Sending LED
b) Scan mode button
c) Left and Right Arrow
buttons
d) Up and Down Arrow buttons
e) Clockwise (CW) and Counter-
clockwise (CCW) buttons
f) Scan 90° and Scan Memory
button
g) Head Speed button
h) Automatic/Manual Mode
button
i) Beam down button
j) Sleep mode button
17