Rc800 Remote Control; Description Of The Remote Control - Leica Rugby 880 User Manual

4
4.1
RC800 Remote
Control
Description of the
Control Panel
Rugby 870/880, RC800 Remote Control

RC800 Remote Control

Description of the Remote Control

The RF Remote Control communicates with the Rugby via RF (radio frequency) and is
used to control the same functions as on the laser.
a
b
c
d
e
007830_002
LCD Display
Power Button
Grade Button
Up and Down Arrow
Buttons
Left and Right Arrow
Buttons
Sleep Mode Button
Rugby LED
Remote Battery LED
* In the Remote Control menu, you can select the sleep time.
f
a) LCD display
g
b) Power button
e
c) Remote battery LED
d) Grade button
e) Left and right arrow buttons
f) Rugby LED
h
g) Sleep mode button
h) Up and down arrow buttons
Displays all required user information.
Press to turn on or off the Remote Control.
Press to start grade entry mode.
Press to change the grade displayed.
Press both simultaneously to reset the grade value to zero.
Press to display and move cursor for grade entry.
Press both simultaneously to enter the Rugby menu.
Press and hold simultaneously for 1.5 seconds to enter the
Remote Control menu.
Press to put the Rugby in sleep mode.
• During Sleep Mode, all functions are disabled.
• The LCD display indicates that the Rugby is in Sleep
Mode.
• The Rugby sleeps for 2 hours
matically and must be turned on again at the laser.
• When in Sleep Mode, pressing the sleep button wakes
the Rugby and normal operation is resumed.
Indicates level status of the Rugby.
Indicates when the batteries for the Remote Control
should be replaced.
*
, then shuts down auto-
24