IR Remote Control
The buttons of the IR Wireless Remote
perform the same functions as the
buttons on the face of the laser with the
following exceptions:
1 Red LED
The Red LED at the top of the
remote will flash when the remote
is sending information to indicate that a
button has been pressed.
2 H.I. Alert Function
With the unit on, press and
hold the off/on switch (4), then
press the auto/manual switch
(5) to turn the H.I. Alert on and off.
3 Beam Down Function
With the unit on, press and
hold the off/on switch (4), then
press the down arrow (6)
switch to turn the beam down function
on and off.
IR Remote Control
Rugby200-9 200remote.eps
11
4 Off/On/Sleep Button
Puts the Rugby 200 into sleep
mode for a minimum of 2
hours.* Press and hold the
Sleep/Power Button for 1.5 seconds to
enter sleep mode. During the sleep
mode period, press the button once to
wake the unit up. The Off/On/Sleep
Button also acts as a Shift key for
activating the H.I. Alert function and
the Beam Down function.
*The IR Remote Control cannot
turn on the Rugby 200 except during
the sleep mode period. This is done to
conserve battery life.
Rugby 200-3.2.1en