Confirming Error Messages - Samson 3730 Series Mounting And Operating Instructions

Operation
The cause and recommended action are
listed in the code list (section 14).
S

8.3.1 Confirming error messages

Enable configuration:
Note: If no settings are entered within
120 seconds, the enabled configuration
function becomes invalid.
Turn → Code 3, display: No
Press , Code 3 blinks
Turn → YES
Press , display:
Confirm error messages:
Turn → Error code which you want to
confirm.
Press to confirm the error message.
74
EB 8384-4 EN
Example
Error caused by pin
position