Load Data; Export Data - WIKA CPT2500 Operating Instructions Manual

6. USB-ScanSoft software

6.3.9 Load data

With a left click on "Load data", past data loggings can be loaded. The program
opens a new dialogue in which the folder with the corresponding logging data must be
selected.
⇒
This function is only active when data logging is not in progress.
The instruments with the instrument settings as well as the entered comment are
displayed here.

6.3.10 Export data

The settings shown here (and preset by default) are for Microsoft Excel. Here the CSV
file can then be selected under "Open file", imported and processed further. Other
programs may require different settings.
⇒
This function is only active when data has been loaded.
1. By left-clicking on "Export data", the
measured values will be saved as a CSV
file and the diagram as a picture.
2. With a right click on "Export data", the
settings for the CSV file are made.
3. Once the settings have been changed,
confirm with [OK].
⇒
The program saves the settings and
reloads them every time the program
is started.
WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft
EN
31