6.3.4 Changing The Curve Description; Data Labels - WIKA CPT2500 Operating Instructions Manual

6. USB-ScanSoft software

6.3.4 Changing the curve description

By right-clicking on the curve, the colour and the curve description can be changed. By
clicking [OK], the change is accepted and stored in the database.
EN

6.3.5 Data labels

Each loaded curve can have any data label added to it.
When a data logging is loaded, data points can be annotated by left-clicking on the
curve.
The data labels can be moved at any time using drag-and-drop.
1. After a data logging, the saved file must be
opened first.
2. To change the data point description, right-
click on the description.
⇒
A window opens in which the curve
description can be changed (also with line
break).
3. Confirm changes with [OK]
⇒
The data labels are saved in the database
and are also displayed again when the
data has been loaded.
The data label can also be deleted at any time by clicking the [Delete] button.
28 WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft