6. USB-ScanSoft software
6.3.6 Start search
Here you can set the presetting for the instruments found. These are identical for all
instruments. It is not possible to differentiate here.
⇒
This function is only active when data logging is not in progress.
By right-clicking / left-clicking or pressing the [F5] key, a search of all instruments
connected to the system is carried out.
Found instruments are displayed in the register "Device".
With a left click, the default settings are opened.
The following settings can be made:
Define start and stop condition
■
Specify whether the instrument should already be activated for data logging.
■
WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft
EN
29