6. USB-ScanSoft software
6.3.3 "Chart" register
The "Chart" register is only active if either a data logging is currently taking place or an
existing logging has been loaded.
1
Date and time; start of pressure test; display of pressure; Ex.: -0.8 mbar
2
Date and time; pressure value not reached; display of pressure; Ex.: 8.32 mbar
3
Date and time; pressure value reached; display of pressure; Ex.: 9.78 mbar
4
Date and time; pressure value not dropped; display of pressure; Ex.: 9.77 mbar
5
Date and time; starting of cycle test; display of pressure; Ex.: 0.14 mbar
Date and time; passed the test; display of pressure; Ex.: 16.04 mbar
6
After a data logging, the complete data can be loaded and displayed as a diagram.
Since each second can contain up to 1,000 measuring points, the diagram is
dynamically recreated for each zoom level.
During a running data logging, more detailed data from
each logged instrument is shown in addition to the curve.
The following is displayed:
Measured value
■
Unit
■
Measurement type
■
Time of the last update
■
Instrument status
■
After the data logging is finished, the display is automatically closed again.
WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft
1
2
5
3
4
EN
6
27