Table of Contents
Advertisement
4 Unpacking and Checking Contents
Hardware Bag #1 (For extension table assembly)
M10X25 Socket head bolt (6)
10mm Lock washer
10mm Flat washer
Hardware Bag #2 (For guide rail)
M8X25 Hex head bolt (6)
M8X25 Socket head bolt (6)
8mm Flat washer (18)
M8 Hex nut (12)
Hardware Bag #3
M8X16 Carriage bolt (16) (For assembling stand to main machine)
8mm Lock washer (16)
8mm Flat washer (16)
M6X20 Socket head screw (2) (For assembling fence storage hooks)
M4X8 Pan head screw (4) (For assembling blade guard storage hooks)
4mm Flat washer (4)
IMPORTANT: Table is coated with a protectant. To ensure proper fi t and operation, remove coating. Coating
is easily removed with mild solvents, such as mineral spirits, and a soft cloth. Avoid getting solution on paint
or any of the rubber or plastic parts. Solvents may deteriorate these fi nishes. Use soap and water on paint,
plastic or rubber components. After cleaning, cover all exposed surfaces with a light coating of oil. Paste wax
is recommended for table top.
WARNING: Never use highly volatile solvents. Non fl ammable solvents are recommended to avoid
4.2 Assembly
CAUTION: Do not attempt assembly if parts are missing. Use this manual to order replacement parts. Be certain
all parts are clean and free of shipping preservative. Also, completely remove all parts of packing. Saw cabinet
should be directly on the fl oor.
SAW INSTALLATION
Positioning the saw on a level surface will improve stability and accuracy and prevent warpage and failure of
cast components and welds.
WARNING: Make certain that the saw is disconnected from the power source.
16
Advertisement
Table of Contents
