RIVING KNIFE TO BLADE ADJUSTMENT
The riving knife should be in line with the saw blade. If adjustment is necessary:
•
Loosen the two socket pan head screws slightly.
•
Adjust the set screws as needed to correct the out-of-align blade attachment. Do small adjustments and
check.
•
Once the riving knife is aligned with the blade, tighten the two socket pan head screws.
RAIL ASSEMBLY
Refer to following fi gure.
•
Place table insert into throat of table and turn the knob to lock it
•
To adjust insert level with table, adjust leveling screws up or down.
23
4 Unpacking and Checking Contents