1. Manuals
  2. Brands
  3. MAKSIWA Manuals
  4. Saw
  5. MK.200.I
  6. Instruction manual

MAKSIWA MK.200.I Instruction Manual

Miter saw 10" with laser guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MK.200.I
MITER SAW 10" WITH LASER GUIDE
___________________________________________________________________
_
INSTRUCTION MANUAL
___________________________________________________________________
_
ATTENTION: READ THIS MANUAL BEFORE USING THE PRODUCT.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MK.200.I and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MAKSIWA MK.200.I

Summary of Contents for MAKSIWA MK.200.I

  • Page 1 MK.200.I MITER SAW 10" WITH LASER GUIDE ___________________________________________________________________ INSTRUCTION MANUAL ___________________________________________________________________ ATTENTION: READ THIS MANUAL BEFORE USING THE PRODUCT.
  • Page 2 Picture 1 (IIlustrative Picture) Picture 2 (Illustrative Picture) Grip Trigger switch Engine Housing Side Extenders Side Guides Square fastener button Square Scale Table Mounting Holes Table 10. Fastener 11. Dust Collector Bag 12. Saw protector...

  • Page 3: Safety Instructions For All Tools

    Do not use the saw in hazardous environments. INSTRUCTION MANUAL Do not use power tools in damp or wet or exposed to Important information you should know: rain. Keep the work area well lit. Make cuts only with sharp blades. Discs that are not sharp do not cut properly and overload the engine.
  • Page 4 Protect the power supply line with at least a 15 amp Never step on the tool. A serious accident can occur if the tool is tilted or if the tool is touched accidentally. fuse or a circuit breaker. Check for damaged parts. Before continuing to use Make sure that the blade is turning in the correct the tool, a guard or other part that is damaged must be direction and that the teeth at the bottom of the blade are...
  • Page 5 A 10% decrease in voltage or more will Do not operate the saw without the guides. cause loss of power and overheating. All MAKSIWA Do not perform any hands-free operation. equipment is tested at the factory. If this tool does not Do not reach around or behind the blade.
  • Page 6 Dispose the packaging in a sustainable lock the shaft with one hand and use the blade wrench environmental way. with the other to loosen (clockwise) the screw in the slot on the left side of the blade. NEVER TIGHTEN The miter saw is designed to operate indoors and THE AXLE LOCK PIN WHILE THE BLADE IS must be placed on a firm, stable and level surface, as SPINNING.

  • Page 7: Operation

    Switch: handling or any other reason, follow the steps below to adjust your saw. Once these adjustments are Turn on the saw, press the trigger switch. To turn the made, they will remain accurate. Follow these tool off, release the switch. There is no mechanism to lock the switch in the on position.
  • Page 8 Cut Quality CHECK THE MAKSIWA CATALOG AND FIND The smoothness of any cut depends on a number of PRODUCTS FOR THIS FUNCTION. Cutting Frames, variables. Factors such as the type of material being...

  • Page 9: Special Cuts

    2. The miter plans at the rear of the frame must fit Examples Number of Sides Chamfer or Square angle directly on the guide and the saw table. 45º 3. Check the cuts so that they are flat, thus avoiding 36º...

  • Page 10: Maintenance

    (including inspection and particularly when making angular cuts. replacement) to the technical assistance recommended by MAKSIWA, which will always use genuine spare parts and accessories, reassembling your saw in the same way as the original. MAINTENANCE The use of this tool for professional or industrial 1.

Table of Contents