ATTACH EXTENSION TABLES
Refer to following fi gure
•
With help of another person, place the table saw upright. Adjust the feet to make the table saw stand stably.
•
With help of another person, Assemble extension table to the table using socket head bolts, lock washers
and fl at washers.
•
If necessary, remove the left side cover to install the extension table and replace it after the installation.
•
Wipe surface clean.
•
Do not tighten completely until tables are level. Use a straightedge to level tables. If necessary, adjust the
set screw to level the table.
•
After tables are adjusted level and fl at, secure the extension tables by tightening the bolts completely.
•
Repeat above procedure for the other extension table.
19
4 Unpacking and Checking Contents