MAKSIWA SC.1100.X Instruction Manual page 14

10” table saw - 3 wire 220 v - 1 phase
Table of Contents

Advertisement

3 Specifi cations
WARNING: Improper connection of equipment grounding conductor can result in the risk of electrical shock.
Equipment should be grounded while in use to protect operator from electrical shock.
WARNING: This machine is for indoor use only. Do not expose to rain or use in damp locations.
GUIDELINES FOR EXTENSION CORDS
USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension
cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause
a drop in line voltage, resulting in loss of power and cause overheating.
Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension
cord or have it repaired by a qualifi ed person before using it. Protect your extension cords from sharp objects,
excessive heat and damp or wet areas.
ELECTRICAL CONNECTIONS
WARNING: Make sure unit is off and disconnected from power source before inspecting any wiring. The power
lines are inserted directly onto the switch. The green ground line must remain securely fastened to the frame
to properly protect against electrical shock.
14

Advertisement

Table of Contents
loading

Table of Contents