Table of Contents
Advertisement
Switch Installation
Connecting to Power
Crimping tool (such as Thomas & Bett part number WT4000, ERG-2001, or equivalent).
10-gauge copper ground wire.
For DC power connections, use UL- and CSA-rated, style 1007 or 1569 twisted-pair copper appliance wiring
material (AWM) wire.
Wire-stripping tools for stripping 10- and 18-gauge wires.
A number-2 Phillips screwdriver.
A flat-blade screwdriver.
Supported Power Supplies
Table 1
Supported Power Supplies
PWR-IE65W-
PC-DC
Current
DC-DC
Input
18-60 VDC/4.3
Amp
Output
54VDC/1.2 Amp
Dimensions
5.9 in H x 2.1 in. W
x 4.9 in. D
Usage
Designed for up to
25W of POE load
Installing the Power Supply on a DIN Rail, Wall, or Rack Adapter
You install the power converter on a DIN rail, wall, or rack as you would a switch module.
Warning:
This equipment is supplied as "open type" equipment. It must be mounted within an enclosure that is
suitably designed for those specific environmental conditions that will be present and appropriately designed to
prevent personal injury resulting from accessibility to live parts. The interior of the enclosure must be accessible
only by the use of a tool.
The enclosure must meet IP 54 or NEMA type 4 minimum enclosure rating standards. Statement 1063
Caution:
To prevent the switch assemble from overheating, there must be sufficient spacings as explained under
Installation Guidelines, page
Grounding the Switch
Make sure to follow any grounding requirements at your site.
PWR-IE65W-
PWR-IE170W-
PC-AC
PC-DC
AC-DC
DC-DC
110/220 VAC and
10.8-60 VDC/23
88-300 VDC
Amp
54VDC/1.2 Amp
54VDC/3.15 Amp
5.9 in. H x
5.93 in (149.8 mm)
2.1 in. W x
H x 4.47 in. (113.5
4.9 in. D
mm) W x
5.7 in. (144.7 mm)
D
Designed for up to
Designed for up to
25W of POE load
8 POE ports or
123W of POE
power.
11, between any other switch assembly.
13
PWR-IE170W-
PWR-IE50W-
PC-AC
AC-IEC
AC-DC
AC-DC
110/220 VAC and
110/220 VAC
88-300 VDC/2.1
Amp
54VDC/3.15 Amp
24VDC/2.1Amp
5.93 in. (150.6mm
5.8 in. H x 2 in. W
) H x
x 4.4 in. D
3.72 in. (94.5mm)
W x
5.6 in. (142.2mm)
D
Designed for up to
No POE support
8 POE ports or
123W of POE
power.
PWR-IE50W-
AC
AC-DC
110/220VAC and
88-300 VDC
24 VDC / 2.1Amp
5.8 in. H x 2 in. W
x 4.4 in. D
No POE support
Advertisement
Table of Contents
