Display Installation - Planar Dome E4c User Manual

6 | Dome E4c Display

Display Installation

Before you install the MX4 graphics display controller, remove any
existing graphics board and its driver from your computer. After
installation, the display turns on automatically when you turn on
your computer system.
Safety precautions
In locations where 240V outlets are used, connect the Dome E4c
display only to a center-tapped, 240V, single-phase supply (for
Canada and the United States only).
Turn off your computer before you install the graphics display
controller, but leave the power cord plugged into the grounded
outlet. Otherwise, you could get an electric shock and cause
damage to the components.
To prevent electrostatic discharge, take these precautions:
• Slowly remove the graphics board from its static-shielding bag.
• Wear an antistatic wrist strap.
• Repeatedly touch the power supply or the metal surface of
the computer chassis to discharge your body's static electricity.