Display Power - Planar Dome E4c User Manual

Display power

The power input port is an 8-pin DIN connector that drives power to
the display. See page 17
The dual-link DVI cable drives data to the display and is integrated
into the display unit. When the DVI cable is disconnected from the
graphics board, the display backlight turns off and the unit enters
power-saving mode.
Display brightness and power saving functions are controlled via the
Dome CXtra software. No other user-accessible controls are available.
for the pin assignment.
DIN connector, left
Integrated dual-link DVI cable, right
About the Display | 3