Specification - Planar Dome E4c User Manual

Specification

In locations where 240V outlets are used, connect the Dome E4c display only to a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category
Screen
Interface
Input formats
Physical
Power
Characteristic Item
Screen size diagonal
Resolution
Pixel pitch
Pixel arrangement
Active area
Number of colors supported
Refresh rate
Contrast ratio
Brightness
Pixel rise/fall time
Viewing angle
Digital Video In
Display control –
Brightness/contrast
Display identification
Display status
Landscape orientation
VGA/XGA
Screen type
Protective glass
Display size (without stand)
Display weight (without stand)
Mounting options
Adapter
Specification
756.228 mm (30 in.)
2560 x 1600 pixels (landscape)
0.2505 mm, 101 dpi
RGB vertical stripe
641.28 mm x 400.8 mm (25.25 in. x 15.78 in.)
16.7 million colors, 256 shades of gray from
a palette of 1786 near-gray shades
60 Hz
600:1 (typical)
2
300 cd/m (typical) – protective glass model
2
330 cd/m (typical) – open bezel model
14 ms typical Black-White
11 ms typical Gray-Gray
± 85° (170°) horizontal
± 85° (170°) vertical
DVI Rev. 1.0 digital dual-link connector
DDC2B+
EDID read using DDC2B+
LED on front of unit
2560 x 1600 (24-bit color)
640 x 480 –1280 x 800
AMLCD (active matrix liquid crystal display)
Antistatic hard coating (3H)
713 mm x 473 mm x 72 mm
(28.0 in. x 18.6 in. x 2.8 in.) nominal
12.7 kg (28 lb)
Desktop stand (standard);
100 mm x 200 mm VESA wall mount (optional)
JEC Korea Corporation, Type JMW1150KA2423F51
CAUTION: Use only the power adapter supplied
with the display unit.
Specification | 15