Planar Dome E4c User Manual page 19

To change video setting per display
1 Click the PowerDesk icon on the taskbar.
2 On the PowerDesk menu, select the graphics card representing the
display you want to change video settings on, then select Grayscale
Setup category. NOTE: Grayscale mode is the installation default.
PowerDesk menu
3 Select one of the options.
– Use Color (RGB mode)
– 256 (Grayscale mode)
When using the grayscale mode, be sure to select the fixed linear
gray palette.
4 Click Apply or OK.
5 Restart the system.
NOTE: You must restart the system each time you change the video
settings of a display. For dual configurations, change the settings of
the first display and restart the system, then change the settings of
the second display and restart.
Display Installation | 11