Table of Contents
Advertisement
Quick Installation
Connect either HDMI or DisplayPort Video Source from the monitor to the computer.
1.
Make sure both monitor and computer are powered OFF.
2.
Connect the USB cable from the computer to the monitor.
3.
Connect power cord to a properly grounded AC outlet, and then to the monitor.
4.
Power-ON computer and then POWER-ON the monitor.
5.
Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x
1080 @ 60Hz.
Figure 1:
Power cable
HDMI cable
DisplayPort cable
8
PC
USB A-B cable
Advertisement
Table of Contents
