Dynamic Zone Programming; Entering The Dynamic Zone To Select A Dynamic Channel; Saving A Channel In The Dynamic Zone From List Selection - Motorola APX E5 User Manual

MN006147A01-AE
Chapter 6: Advanced Features
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-
pitched alert tone and the display shows No acknowledge. Try again or press
return to the Home screen.
6.2.8

Dynamic Zone Programming

Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTE: Your radio must be preprogrammed for you to use this feature. At least one zone in the
radio must be a non-dynamic zone.
6.2.8.1

Entering the Dynamic Zone to Select a Dynamic Channel

Procedure:
1 or to Zone then press the Menu Select button directly below Zone.
The display shows the Zone screen.
2 or to <# Dynamic Zone Channels>.
3 Perform one of the following actions:
• Press the Menu Select button below Sel to select.
• Press the Menu Select button below Exit to exit.
If you have selected one of the Dynamic Zone Channels list, the display returns to Home screen
with the selected <# Dynamic Zone Channels> shown on the screen.
If you have selected Exit without selecting any Dynamic Zone Channels list, the display returns
to Home screen without any changes.
6.2.8.2

Saving a Channel in the Dynamic Zone from List Selection

Prerequisites:To perform this operation, the radio must be in the Dynamic Zone.
Procedure:
1 or to ZnPr. Press the Menu Select button directly below ZnPr to enter the Program Zone
screen.
2 Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3 or to List Selection. Press the Menu Select button directly below Sel .
The display shows Select Zone screen.
4 or to the required zone. Press the Menu Select button directly below Sel .
The display shows Select Chan screen.
48
to cancel and