Chapter 29: Dynamic Zone Programming; Selecting Channels In The Dynamic Zone; Deleting Channels In The Dynamic Zone - Motorola APX 2 User Manual

MN009203A01-AD
Chapter 29 : Dynamic Zone Programming
Chapter 29
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTE: Your radio must be programmed for you to use this feature. At least one zone in the
radio must be a nondynamic zone.
29.1

Selecting Channels in the Dynamic Zone

Procedure:
1 Enter a dynamic zone by performing the following actions:
a Press the Zone menu item.
b Select <# Dynamic Zone Channels> and press Sel.
# indicates the channel number on the 16-Position Switch that is numbered from 1 to 16.
2 Press the ZnPr menu item.
3 Press Edit→List Selection→Sel.
4 Scroll to the required zone and press Sel.
5 Scroll to the required channel and press Sel.
The display shows a positive notification and the channel is added to the Dynamic Zone.
29.2

Deleting Channels in the Dynamic Zone

Procedure:
1 Enter a dynamic zone by performing the following actions:
a Press the Zone menu item.
b Select <# Dynamic Zone Channels> and press Sel.
# indicates the channel number on the 16-Position Switch that is numbered from 1 to 16.
The radio returns to the Home screen and displays the selected Dynamic Zone Channel.
2 Press the ZnPr menu item.
3 Select the required saved dynamic channel and press Del.
4 To return to the Home screen, press Exit.
The Home screen shows <Dynamic Zone Channels>. If the deleted channel is the home channel,
the Home screen shows <Zone Name>"Blank".
94