Table of Contents
Advertisement
6.14.2
User Login Feature
This feature allows you to take on a friendly username for (Example: Text Messaging Service).
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for LMR Messaging.
NOTE: Valid characters for a username entry are capital letters (A–Z), small letters (a–z),
numbers (0–9), symbols (*, #, -, /), and the space character.
The maximum length for a username is eight characters. Usernames are not case-sensitive in
server mode but are case-sensitive in non-server mode.
A predefined username may sometimes be invalid because the programming software that is
used to set predefined usernames allows you to set usernames comprising of eight characters
or more.
6.14.2.1
Logging In as a User
Procedure:
1
or to User and press the Menu Select button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
•
or
to [ID Entry] and press the Menu Select button directly below Edit to enter ID.
A blinking cursor appears on the screen. Use the keypad to type or edit a user name. Press
the Menu Select button directly below Ok to submit.
•
or
to scroll through the list of predefined user names. Press the Menu Select button
directly below Sel to select the predefined user name.
•
Press and hold
rate. Press the Menu Select button directly below Logn to select the predefined user name.
If the selected predefined username has more than eight (8) characters, or an invalid character
in it, the display momentary shows Invalid ID.
3 Press the Menu Select button directly below PIN.
A blinking cursor appears beside PIN.
4 Enter your Personal Identification Number (PIN) number.
The maximum PIN length is four digits. The PIN number appears as asterisks.
5 Press the Menu Select button directly below Logn.
One of the following scenarios occurs:
•
In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and In
progress, with Cncl .
•
In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
•
In non-ARS enabled mode, the display shows Offline, with Logt and Exit.
One of the following scenarios occurs:
or
to scroll through the list of predefined user names at a fast scroll
MN006147A01-AE
Chapter 6: Advanced Features
71
Hide quick links:
Advertisement
Table of Contents
