Requesting A Reprogram (Trunking Only); Classifying Regrouped Radios; Using Dynamic Zone Programming (Dzp) - Motorola ASTRO APX 4000 Model 2 User Manual

Requesting a Reprogram (Trunking Only)

This feature allows you to notify the dispatcher when you want a
new dynamic regrouping assignment.
Procedure:
Press the preprogrammed Reprogram Request button to send
reprogram request to the dispatcher and proceed to Step 3.
OR
Follow the procedure below.
1 < >
or to Rpgm.
2
Press the Menu Select button directly below Rpgm to send
reprogram request to the dispatcher.
3
The display shows Reprgrm rqst and Please wait.
4
If you hear four beeps, the dispatcher has acknowledged the
reprogram request. The display shows Ack received and
the radio returns to the Home screen.
OR
If the dispatcher does not acknowledge the reprogram
request within six seconds, you hear a low-pitched alert tone
and the display shows No acknowledge.
Try again or press
screen.
46
English
H
to cancel and return to the Home

Classifying Regrouped Radios

The dispatcher can classify regrouped radios into either of two
categories: Select Enabled or Select Disabled.
•
Select-enabled radios are free to change to any available
channel, including the dynamic-regrouping channel, once the
user has selected the dynamic-regrouping position.
•
Select-disabled radios cannot change channels while
dynamically regrouped. The dispatcher has forced the radio
to remain on the dynamic-regrouping channel.
The Scan or Private Call feature cannot be selected while your
radio is Select Disabled.

Using Dynamic Zone Programming (DZP)

Note: Your radio must be preprogrammed to allow you to use
this feature.
This feature works on the condition at least one zone
in the radio must be a non-dynamic zone.
This feature provides one or more Dynamic Zones to store the
frequent used channels be it conventional or trunking. These
dynamic channels are saved from pre-existing (non-dynamic)
channels in the radio. This saves the time and effort from the
regular navigation around the working zones and channels.
User can also delete or update the list in the Dynamic Zone.