Table of Contents
Advertisement
• CHRONO
The chrono allows to program 4 time spans within a day to use every
day of the week.
The switch-on and switch-off time can be set in every time slot,
along with the days of use of the programmed time slot and the
desired water temperature (65 - 80°C).
TO ENABLE THE CHRNONO, fOLLOW THE INSTRUCTIONS
DESCRIBED IN "ENABLE CHRONO" CHAPTER
ignition hour
shutdown hours:
forward
recommendaTions
The ignition and switch-off times must be within the arc of one
day, from 0 to 24 and not over several days:
Before using the chrono function, set the current day and time.
Therefore check that the points listed in the "SET CLOCK" sub-
chapter have been followed, so that the chrono function works.
As well as programming it, activate it as well.
• LANgUAgE
(see chapter before ignition)
• DISPLAY
- BuZZer
- BrighTness
- conTrAsT
The Display menu allows you to:
� enable / disable the buzzer.
� Adjust the brightness of the display
� Adjust the contrast of the display
setting
eXample
ENGLISH
Temperature set
R
Days enabled
Days not enabled
1 = Monday
2 = Sunday
Back
switch-on time 07:00
CORRECT
Switch-off time 18:00
switch-on time 22:00
INCORRECT
Switch-off time 05:00
25
Advertisement
Table of Contents
