Table of Contents
Advertisement
positioning
For correct product functioning, it is recommended to position it so that it is perfectly level, using a spirit level.
REARMs
The figures below illustrate the positions of the tank (85°C) and H2O (100°C) rearms. Contact the qualified technician if one of the rearms
should be triggered, so as to verify the cause.
85°c
100°c
FEAtUREs
Water content of the thermo-product heat exchanger (l)
Volume of expansion vessel integrated in the thermo-product (l)
3 bar safety valve integrated in the thermo-product
Minimum and maximum pressure switch integrated into the thermo-product
Pump integrated into the thermo-product
Pump max. head (m)
*
Envision a possiblE additional Expansion vEssEl dEpEnding on thE systEm watEr contEnt.
The diagram to the side illustrates the behaviour of the pump
used on our thermo-products at the speeds that can be set.
85°c
Hp15 EVo
32
*
8
P
P
P
6
7
6
5
4
3
2
1
0
0
0,5
1
ENGLISH
100°c
H
H
Hp22 EVo
Hp30EVo
32
*
8
P
P
P
6
1,5
2
2,5
Flow rate (m
/h)
3
66
*
12
P
P
P
6
3
3,5
13
Advertisement
Table of Contents
