Table of Contents
Advertisement
SEt powEr
The following menu allows the power to be set. minimum power 1, maximum power 5.
CONTrOls prOCeDUre
Š press key 6 and SEt powEr will appear
Š press key 6 to access and key 2 to proceed
Š SEt tEmpEraturE will appear.
Š press 4 to increase the set and 5 to decrease it.
Š press key 6 to confirm and key 1 to return to the previous menus
up to the initial status
SEt tEmpEraturE
The following menu allows the boiler temperature to be set
The possible settings are: 65 - 80°C.
CONTrOls prOCeDUre
Š press key 6 and SEt powEr will appear
Š press key 2 several times until SEt tEmpEraturE is displayed
Š press 6 to access
Š press 4 to increase the set and 5 to decrease it.
Š press key 6 to confirm and key 1 to return to the previous menus
up to the initial status
SEt adjuStmEntS
EnaBlE CHrono
The boiler chrono can be enables/disables from this menu
CONTrOls prOCeDUre
Š press key 6 and SEt powEr will appear
Š press key 2 several times until SEt adjuStmEntS is displayed
Š press key 6
Š EnaBlE CHrono will be displayed
Š Use keys 4 or 5 to activate and set to "on"
Š press key 6 to confirm and key 1 to return to the previous menus up to
the initial status
pEllEt rEGulatIon
The following menu allows the adjustment of pellet feed as a percentage.
if the stove has functioning problems owing to the quantity of pellets, adjust pellet feeding directly from the control board.
The problems correlated to the amount of fuel can be divided into 2 categories:
30
| EnGlISH
Advertisement
Table of Contents
