Table of Contents
Advertisement
� BUzzER
when set to "off" the acoustic signal is disabled.
� BRIgHTNESS
It allows you to adjust the backlight of the display.
The possible settings range from off - 10 to 30.
Activating OFF, the back light of the display will go off after a
preset delay.
The back light will go on as soon as a key is pressed or if an
alarm should be triggered in the machine.
� CONTRAST
Allows you to change the display contrast.
(Range from 2-50)
• RESET
Allows to reset all values modifiable by the user to the default
values.
OTHER fUNCTIONS
OUTLET AIR
This function allows you to discharge any air in the product (for 15 minutes, the pump will operate alternately 15 seconds on and 15 seconds off ).
To activate the function:
cold and
with the generator
To stop the "ouTLeT Air" function press the button
PRELOAD
This function allows to activate the pellet feeding motor reducer for
continuous functioning.
To activate the function:
with the generator cold and in "off" state press
for 5 secs.
To stop the "First load" press the key
COMBUSTION CHAMBER CLEANINg
T
his feature allows you to open the bottom brazier, facilitating the cleaning of the combustion chamber.
To activate the function:
with the generator cold and in "off" state press
With the ash hook supplied as standard scrape the walls of the combustion chamber and transfer the residual ash in the brazier room
into the ash tray.
After cleaning, press and hold the button
OPEN THE DOOR ONLY WHEN THE OPERATION IS PERfORMED! THE DISPLAY WILL INDICATE THE SUCCESSfUL OPENINg!
26
in "off" state press
and then "air" for 5 secs.
and then "LoAD"
and subsequently
.
cLeAning
for 5 sec.
ENGLISH
preLoAD
ouTLeT Air
a
Advertisement
Table of Contents
