Table of Contents
Advertisement
7.2.3 To close the indoor unit
7.3 Mounting the indoor unit
7.3.1 About mounting the indoor unit
7.3.2 Precautions when mounting the indoor unit
7.3.3 To install the indoor unit
EKHWET90+120B
R32 Split series – Domestic hot water tank
4P680077-1A – 2022.11
4×
1 Reinstall the switch box cover.
2 Reinstall the top cover.
3 Reinstall the bottom cover.
NOTICE
When closing the indoor unit cover, make sure that the tightening torque does NOT
exceed 2.94 N•m.
When
You have to mount the outdoor and indoor unit before you can connect the
refrigerant and water piping.
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
"2 General safety
▪
"7.1 Preparing the installation
1 Install 2 plugs into the wall and insert (but not completely) 2 bolts with
washers into the plugs.
precautions" [
4
9]
4
site" [
28]
7
Unit installation
|
Installer reference guide
37
Advertisement
Table of Contents
