Table of Contents
Advertisement
10
|
Configuration
10.4.3 Schedule screen: Example
Installer reference guide
62
Schedule/Control
[5.F] Tank > Priority
schedule
Schedule for the outdoor unit
to determine priority between
domestic hot water tank
operation and air conditioning
[7.4.2] User settings >
Quiet > Schedule
Schedule for when the unit has
to use which quiet mode level.
This example shows how to set a tank heat up schedule.
To program the schedule: overview
Example: You want to program the following schedule:
User defined
Mon
Tue
Wed
Thu
Fri
Sat
Sun
1 Go to the schedule.
2 (optional) Clear the content of the whole week schedule or the content of a
selected day schedule.
3 Program the schedule for Monday.
4 Copy the schedule to the other weekdays.
5 Program the schedule for Saturday and copy it to Sunday.
To go to the schedule
1 Go to [5.5]: Tank > Schedule.
Description
Predefined schedules: Domestic hot water
as priority for each month
Activation screen: Not applicable. This schedule
is only used when more than one indoor unit
(e.g. 1 tank + 1 A/C unit) connected to outdoor
unit.
Possible actions:
▪
DHW : If there are requests from multiple
indoor units at the same time, the outdoor
unit will prioritize domestic hot water
production.
▪
A/C : If there are request from multiple indoor
units at the same time, outdoor unit will
prioritize Air Conditioning (heating/cooling)
operation.
Predefined schedule: Not applicable
Activation screen: [7.4.1] Mode (only available
to installers).
Possible actions: You can use the following
system-defined preset values:
▪
Off
▪
Quiet
▪
More quiet
▪
Most quiet
See
"About quiet
mode" [
R32 Split series – Domestic hot water tank
4
79].
EKHWET90+120B
4P680077-1A – 2022.11
Advertisement
Table of Contents
