Table of Contents
Advertisement
Fault
The Turbotrimmer
no longer cuts.
If you have any other problems please contact the GARDENA Customer Service.
7. Storage
Storage :
Disposal :
(in accordance with
RL2002/96/EC)
8. Technical Data
Motor power consumption
Mains voltage /
mains frequency
Filament thickness
Cutting width
Filament supply
Filament feed
Weight
Rpm of filament cassette
Work area related emission
characteristic value L
Noise level L
2)
WA
Hand / arm vibration a
Measuring method according to 1) EN 786 2) directive 2000 /14 / EC
14
Possible cause
Filament cassette empty.
Filament too short, drawn into
the cassette or stuck together.
Automatic filament feed is not
working since the automatic
mechanism lever is jammed.
The Turbotrimmer must be stored out of the reach of children.
v Store your Turbotrimmer in a dry place where it is protected
from frost.
Recommended storage :
We recommend that you hang your Turbotrimmer from the cable
lock. Hanging storage helps avoid unnecessary stress on the
cutting head.
The product must not be added to normal household waste. It
must be disposed of properly.
smallCut (Art. 2401)
230 W
230 V / 50 - 60 Hz
1.6 mm
230 mm
6.0 m
Fully automatic
1.6 kg
12,000 rpm
1)
85 dB (A)
pA
measured 92 dB (A) / guaranteed 94 dB (A)
1)
< 2.5 m / s
2
vhw
Remedy
v Replace the filament cassette
– see 5. Maintenance
"Replacing the filament
cassette" ).
v Pull the filament out of the
filament cassette (see above).
v Clean the filament cassette
and area around the
cassette (see above).
Advertisement
Table of Contents
