Table of Contents
Advertisement
3. Assembly
Mounting the cover :
1
3
4. Operation
Risk of injury !
Connecting the Turbotrimmer :
5
Working position
Starting your Turbotrimmer :
0
1. Fit the cover
3
filament
2. Push the cover
click into place.
2
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
V Never bypass the safety devices (by binding the start
button to the handle, for example).
1. Push the extension cable
the cable lock
6
2. Plug the plug
trimmer into the socket
extension cable.
v Hold the Trimmer by the handle
and additional handle
slightly forward.
6
The cutting filament is lengthened automatically. Only the fila-
ment cassette must be replaced when the filament has been
used up.
9
2
1. Press the start button
The Turbotrimmer starts.
6
2. Release the start button
The Turbotrimmer switches off.
1
on the cutting head
through the opening in the cover.
1
onto the cutting head
4
into
5
6
on the handle
7
of the Turbo-
8
of the
6
9
so that the cutting head
0
on the handle
0
on the handle
2
and guide the cutting
2
until you hear it
.
7
8
4
2
is tilted
6
.
6
.
6
5
11
Advertisement
Table of Contents
