Maintenance; Before You Do Maintenance; To Clean The Electric Hedge Trimmer; Storage - Gardena ComfortCut 550/50 Operating Instructions Manual

Electric hedge trimmer
Hide thumbs Also See for ComfortCut 550/50:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 13
2. Hold the front handle (8) with one hand and push the
start button (9).
3. Hold the main handle (10) with the other hand and
push the start button (11).
The product will start.

Before you do maintenance

WARNING!
Risc of physical injury!
Cut injury when the product starts
accidentally.
Disconnect the product from the mains
and slid the protective cover over the
blade before you do maintenance.
To clean the Electric Hedge
Trimmer :
WARNING!
Electric shock!
Risc of injury and risk of damage to the
product.
Do not clean the product with water or
with a water jet (in particular high-pressure
water jet).

To put into storage:

The product must be stowed away from children.
1. Disconnect the product from the mains.
2. Clean the product (see Maintenance) and slide the
protective cover over the blade.
3. Stowe the product in a frost-free place before the first
frost arrives.
15 - 002 - 30.09.2016
To stop:
1. Release the two start buttons (9)/(11).
2. Slide the protective cover over the blade.

Maintenance

1. Clean the product with a damp cloth.
2. Clean the airflow slots with a soft brush (do not use a
screwdriver).
3. Lubricate the blade with a low viscosity oil (e.g.
GARDENA Maintenance Oil Art. 2366). Avoid contact
with the plastic parts.

Storage

Disposal (in accordance with
RL2012/19/EC):
The product must not be added to normal household
waste. It must be disposed of in line with local
environmental regulations.
IMPORTANT!
Make sure that the product is discarded through or via
your municipal recycling collection centre.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comfortcut 600/55Powercut 700/65

Table of Contents