Table of Contents
Advertisement
5. Maintenance
Risk of injury !
Risk of injury !
Cleaning the cover
and ventilation holes :
A
1
Replacing the filament
cassette :
B
C
D
3
G
F
12
There is a risk of injury from the cutting filament !
V Always unplug the mains plug of the Turbotrimmer be-
fore carrying out maintenance work !
Risk of injury and risk of damage to property !
V Never clean the Turbotrimmer under running water or
with a water jet (in particular a high pressure water jet).
The ventilation slots must always be free of dirt.
v Remove any grass and dirt from the cover
A
holes
after each use.
Risk of injury !
A
V Never use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
Only use original GARDENA Filament Cassettes. You can
order Replacement Filament Cassettes from your GARDENA
C
dealer or directly from the GARDENA Customer Service.
• Filament Cassette for Turbotrimmer smallCut : Art. No. 5364-20
1. Unplug the mains plug.
2. Release the cassette cover
and remove the cover.
E
3. Remove the filament cassette
4. Remove any dirt.
5. Pull approximately 5 cm of the filament
filament cassette
6. Insert the filament cassette
so that the filament
7. Fit the cassette cover
that you hear both locking clips
When replacing the cover, ensure that the filament is inside the
metal case and is not trapped.
v If the cassette cover
filament cassette
is completely in the filament cassette holder
B
by pressing both locking clips
D
.
3
D
through the hole in the plastic ring
D
in the filament cassette holder
3
is inside the metal case
B
on the filament cassette holder
C
click into place.
B
cannot be touched down, turn the
D
to and fro, until the filament cassette
1
and ventilation
C
out of the new
E
.
F
G
.
F
so
D
F
.
Advertisement
Table of Contents
