Installing The Charger Tray And Charger; Connecting The Power Distribution (Bdist) - ASL INTERCOM BPC130 Series Product Manual

Figure 14 Fitting the batteries into the tray and connecting the interlink cables
6V
-
UPPER TRAY
FRONT OF RACK
6V
+
LOWER TRAY
FRONT OF RACK
5. Fit a protective cap (supplied) to each of the battery terminals connected to a interlink cable.
3.4.2.2

Installing the Charger Tray and Charger

Refer to Section "3.4.1.2 Installing the Charger Tray and Charger" (page 12).
3.4.2.3

Connecting the Power Distribution (BDIST)

Refer to Section "3.4.1.3 Connecting the Power Distribution (BDIST)" (page 14).
BPC130 / BDIST / MDIST – Product Manual
+
-
6V
+
-
+
6V
-
U-0456-0145.doc – Issue: 04 complete, approved
Batteries are heavy (23 kg each).
! !
Please move and handle with care to
avoid personal injuries and/or
damages to the batteries.
Always use insulated tools!
! !
Note the correct polarity when
! !
connecting the interlink cable(s):
Red band terminal=positive
Black band terminal=negative
Fit protective cap to battery terminals!
! !
(Depending on the model supplied, the
battery terminal protective caps must
be fitted to the lead before its
connection to the battery terminal.)
Page 18 of 40