ASL INTERCOM BPC130 Series Product Manual page 11

2. Slide the batteries into the tray and then connect the interlink cables (short) noting the layout
diagram in Figure 6.
Figure 6 Fitting the batteries into the tray and connecting the interlink cables
-
-
-
FRONT OF RACK
3. Fit a protective cap (supplied) to each of the battery terminals connected to a interlink cable.
BPC130 / BDIST / MDIST – Product Manual
+
-
+
6V
+
6V
+
6V
6V
U-0456-0145.doc – Issue: 04 complete, approved
Page 11 of 40
Batteries are heavy (23 kg each).
! !
Please move and handle with care to
avoid personal injuries and/or
damages to the batteries.
Always use insulated tools!
! !
Note the correct polarity when
! !
connecting the interlink cable(s):
Red band terminal=positive
Black band terminal=negative
Fit protective cap to battery
!
!
terminals!
(Depending on the model supplied,
the battery terminal protective caps
must be fitted to the lead before its
connection to the battery terminal.)