Sony SRG-A40 Command List page 71

Parameter
NdiTransferModeMulticastUdp
NdiTransferMulticastPrefix
NdiTransferMulticastNetmask
NdiTransferMulticastTTL
NdiTransferModeMultiTcp
NdiTransferModeUnicastUdp
stream.cgi
Setting (Set): command/stream.cgi?<Parameter>=<Value>
Inquiry (Inq): command/inquiry.cgi?inq=stream
Parameter
StreamMode
StreamStatus
srt.cgi
Setting (Set): command/srt.cgi?<Parameter>=<Value>
Inquiry (Inq): command/inquiry.cgi?inq=srt
Parameter
SrtTtl
SrtPeerLatency
SrtArc
SrtLastEvent
SrtServerUrl1
Set
Value
Inq
Set on, off
Inq
Set 239.255.0.0
Inq IPv4 Address
Set 255.255.0.0
Inq IPv4 Address
Set 3
Inq 1 to 255
Set on, off
Inq
Set on, off
Inq
Set
Value
Inq
Set rtsp, srt-caller, srt-
Inq listener, ndi_hx, off
Inq invalid, off, streaming
Set
Value
Inq
Set 64
Inq 1 to 255
Set 120
Inq 20 to 8000
Set on, off
Inq
Inq 0 to 9999
Set 0 to 512 characters
Inq
71
Description
Sets enable/disable for the NDI Multicast
streaming.
on : Enable
off : Disable
Sets the Prefix of Multicast Address during
NDI Multicast streaming.
Sets the Netmask which decides the range
of Multicast Address during NDI Multicast
streaming.
Sets the TTL during NDI Multicast
streaming.
Sets enable/disable for the NDI Multi-TCP
mode.
on : Enable
off : Disable
Sets enable/disable for the NDI Unicast UDP
mode.
on : Enable
off : Disable
Description
Selects the streaming protocol.
srt-caller and srt-listener can be set only
when AudioIn is on.
Returns the status of SRT streaming. Shows
the same status of UserData streaming.
invalid: No status
off: SRT-Caller Streaming not connected
streaming: SRT-Caller Streaming being
delivered
Description
Sets TTL value.
Sets latency.
On/Off setting of the automatic rate control
function.
Returns the value corresponding to the
event that has occurred for SRT.
A string starting with "srt://" (case without
distinction) or an empty character (0
characters).