Sony SRG-A40 Command List page 51

Parameter
Move
Move
Move
Move
OpticalZoomMaxMagnification
Set
Value
Inq
Set [Value1]
left, right, up, down, up-
left, up-right, down-left,
down-right
[Value2]
0 to 24
Set [Value1]
tele, wide
[Value2]
0 to 8
Set [Value1]
near, far, onepushaf
[Value2]
0 to 8
Set [Value1]
stop
[Value2]
pantilt, motor, zoom,
focus
Inq X20 (SRG-A40)
X12 (SRG-A12)
51
Description
Moves Pan-Tilt by specifying direction.
Move=Value1,Value2
[Value1]
Sets the direction
left : Left
right : Right
up : Up
down : Down
up-left : Up left
up-right : Up right
down-left : Down left
down-right: Down right
[Value2]
Sets the speed for Pan-Tilt
* Larger the number, faster. When set to 0,
the speed changes depending on the zoom
position.
* Refer to the item "PAN/TILT SPEED" of CGI
Command Setting Values.
Moves Zoom by specifying direction.
[Value1]
Sets the direction
tele : Tele
wide : Wide
[Value2]
Sets the speed
* Larger the number, faster.
Moves Focus by specifying direction.
[Value1]
Sets the direction
near : Near
far : Far
onepushaf : Perform one push auto focus.
[Value2]
Sets the speed
* Larger the number, faster.
* The speed of performing onepushaf is
same at all values.
Stops the moving for Pan, Tilt, Zoom, and
Focus.
[Value1]
Stops
[Value2]
pantilt : Stops Pan-Tilt moving
motor : Stops Pan-Tilt moving
zoom : Stops Zoom moving
focus : Stops Focus moving
Returns the maximum optical zoom ratio.