Related Manuals for Sony SRG-120DS
Summary of Contents for Sony SRG-120DS
-
Page 1: Operating Instructions
C-317-100-11 (1) HD Color Video Camera Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. SRG-120DS © 2016 Sony Corporation... -
Page 2: Table Of Contents
Appendix Table of Contents Message List..........18 Troubleshooting ........19 Menu Configuration ........20 Overview Preset Items..........22 License ............23 Features ............3 How to Use This Operating Instructions...3 System Configuration .........4 Operating a Camera Using the Supplied Infrared Remote Commander.....4 Operating a Camera Using the IP Remote Controller ........4 Operating Multiple Cameras Using the IP... -
Page 3: Overview
Overview How to Use This Operating Instructions Features This Operating Instructions explains how to operate the • The 1/2.8 type Exmor CMOS camera (utilising HD Color Video Camera from a computer via a network and from a remote controller (not supplied). approximately 2 million valid pixels) allows for high- The Operating Instructions is designed to be read on the definition shooting with superior picture quality. -
Page 4: System Configuration
System Configuration This unit has various system configuration capabilities using optional products. This section describes typical system examples with the required components and the main usage of each system. Operating a Camera Using the Supplied Infrared Remote Commander What you can do with this system To operate the camera readily from a short distance. -
Page 5: Operating Multiple Cameras Using The Ip Remote Controller
Operating Multiple Cameras Using the IP Remote Controller What you can do with this system You can operate up to 7 cameras with daisy chain connection using the IP remote controller (not supplied). System Configuration HD video monitor, VTR etc. Video switcher IP Remote Controller (not supplied) Video signal... -
Page 6: Operating Multiple Cameras Using Multiple Ip Remote Controllers
Operating Multiple Cameras Using Multiple IP Remote Controllers What you can do with this system • You can connect up to 112 cameras and five IP remote controllers. • The joystick of the IP remote controller allows comfortable pan/tilt and zoom operations. System configuration HD video monitor Video switcher... -
Page 7: Precautions For Preventing Access To The Camera By An Unintended Third Party
Precautions for Preventing Access to the Camera by an Unintended Third Party The camera may be accessed by an unintended third party on the network (LAN or VISCA), depending on the usage environment. If the camera is accessed by an unintended third party, there may be undesired effects such as operations or settings that may interfere with viewing. -
Page 8: Adjusting And Setting With Menus
Setting Menus Adjusting and Setting with Menus The setting menu selected on the main menu is displayed. About On-Screen Menus You can change various settings, such as shooting conditions and system setup of the camera, while observing menus displayed on a connected computer screen. -
Page 9: Exposure Menu
Technical Manual of the For the 59.94/29.97 video format: camera. For details on obtaining a Technical Manual, 1/1, 1/2, 1/4, 1/8, 1/15, 1/30, consult your Sony dealer. 1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000 sec. -
Page 10: White Balance Menu
WDR (VIEW-DR) (Wide dynamic range mode): WHITE BALANCE Menu When MODE (exposure mode) is set to FULL AUTO, the camera distinguishes light and dark areas in the same scene, adjusts the brightness for dark areas, and also controls the blown out highlights. The WHITE BALANCE menu is used to select the white You can select the wide dynamic range mode from balance mode. -
Page 11: Picture Menu
PICTURE Menu PAN TILT ZOOM Menu The PICTURE menu is used to set the items related to the The PAN TILT ZOOM menu is used to select the pan/tilt/ picture. zoom mode. APERTURE (aperture compensation) PAN/TILT LIMIT Select the aperture compensation level from among MIN, When you set PAN/TILT LIMIT to ON, you can select 1 to 14 and MAX. -
Page 12: System Menu
Setting the range of UP/DOWN movement SYSTEM Menu +25° 0° – 25° Note IR-RECEIVE (infrared signal reception) When you turn the camera to the right or left beyond the When this is set to OFF, the camera does not receive the 90°... -
Page 13: Status Menu
Notes STATUS Menu • The operations in the VISCA CONTROL and LAN connection are from n: 1 to 16. • To keep the settings even after restarting the camera, The STATUS menu is used to display the settings store the camera settings to PRESET1. selected with the menus. -
Page 14: Operation Using The Supplied Infrared Remote Commander
To face the camera toward the opposite Operation Using the Supplied direction Infrared Remote Commander You might wish to face the camera toward the opposite direction from that of the button you pressed, for example, when you change the direction of the camera while checking the picture on the screen. -
Page 15: Zooming
Zooming Adjusting the Camera Press either of the ZOOM buttons. Subject appears closer. (Telephoto) NEAR MANUAL Subject appears BACK LIGHT farther away. (Wide angle) AUTO Zooms in or out fast (FAST side) Zooms in or out slowly (SLOW side) Note Focusing on a Subject When you perform pan/tilt operation while the camera is in the telephoto mode, the moving speed of the image on... -
Page 16: Storing The Camera Settings In Memory - The Presetting Feature
Storing the Camera Note The BACK LIGHT function is effective if MODE is set Settings in Memory — to FULL AUTO in the EXPOSURE menu of the camera. the Presetting Feature Up to 16 combinations of settings (16 positions) including camera position, zooming, focusing, and backlighting, can be preset. - Page 17 Cancelling the preset memory While holding down the RESET button, press the POSITION button from which you want to cancel the settings. Press a POSITION button. While holding down this button When you set DISPLAY INFO ( to ON on the page 12) SYSTEM menu, the message “RESET n : OK”...
-
Page 18: Appendix
Appendix Message List The following messages and indications may appear for this camera. Perform the following as necessary. Lamp display Lamp Meaning and solution When the power is turned on, the The SYSTEM SELECT switch or the BOTTOM switch is not set correctly. STANDBY lamp and POWER Check the setting of each switch. -
Page 19: Troubleshooting
Troubleshooting Before bringing in your camera for servicing, check the following as a guide for troubleshooting the problem. If the problem cannot be corrected, consult your Sony Service Center. Symptom Cause Remedy The power of the camera is not turned... -
Page 20: Menu Configuration
Menu Configuration The menus of the camera are configured as described below. For more details, refer to the pages in parentheses. The initial settings of each item are in bold. (See page 9.) (See page 10.) (See page 11.) - Page 21 (See page 11.) (See page 12.) (See page 13.) * PAGE 5: Shows the settings when the BOTTOM switch is set to LAN only.
-
Page 22: Preset Items
For detailed information on the VISCA command list, refer to the Technical Manual of the camera. For details on obtaining a Technical Manual, consult your Sony dealer. The setting of preset numbers 1 to 16 are available for VISCA CONTROL and LAN connection. -
Page 23: License
License This software partially supports component uIP. Therefore the following license conditions apply. Copyright (c) 2001-2006, Adam Dunkels and the Swedish Institute of Computer Science All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. - Page 24 Sony Corporation...