datetime.cgi
Setting (Set): command/datetime.cgi?<Parameter>=<Value>
Inquiry (Inq): command/inquiry.cgi?inq=datetime
Parameter
GmTime
Time
DateFormat
TimeZone
NtpService
NtpAuto
NtpServer
Set
Value
Inq
Set
YYMMDDhhmmssW
Inq
Set
YYMMDDhhmmssW
Inq
Set
ymd, mdy, dmy
Inq
Set
* Refer to the item "TIME
Inq
ZONE" of CGI Command
Setting Values.
Set
on, off
Inq
Set
on, off
Inq
Set
0 to 63 characters
Inq
37
Description
Sets or inquires the date and time by
Coordinate Universal Time (UTC).
YYMMDD : Year, Month, Day [000101 -
380119]
(Defined by DateFormat.)
hhmmss
: Hour, minute, second (24
hours)
W
: Week (Sunday=0, Monday=1,
......, Saturday=6)
When you enter the wrong
value on W, the value is
corrected automatically.
Sets or inquires the date and time by your
local time.
YYMMDD : Year, Month, Day [000101 -
380119]
(Defined by DateFormat.)
hhmmss
: Hour, minute, second (24
hours)
W
: Week (Sunday=0, Monday=1,
......, Saturday=6)
When you enter the wrong
value on W, the value is
corrected automatically.
Sets the display format of time and day.
ymd: YY-MM-DD
mdy: MM-DD-YY
dmy: DD-MM-YY
Sets the timezone.
Sets whether to synchronize the NTP server
or not.
on : Synchronizes.
off : Does not synchronize.
Sets whether to get the IP address of the
NTP (Network Time Protocol) server from
DHCP (Dynamic Host Configuration
Protocol) server or not.
on : Gets the IP address.
off : Does not get the IP address.
Sets NTP server by IPv4 address or host
name style.
Allows 63 or less alphanumeric characters
to be set.