Sony SRG-A40 Command List page 56

Parameter
HomePos
PresetCall
PresetClear
PresetImagingSet
PresetName
PresetNum
PresetSet
PresetThumbnailClear
Set
Value
Inq
Set recall
Set [Value1]
1 to 256
Set 1 to 256
Set 1
Set [Value1]
Inq 1 to 256
[Value2]
0 to 32 characters
Inq 256
Set [Value1]
1 to 256
[Value2]
0 to 32 characters
[Value3]
on, off
Set 1 to 256
56
Description
Moves the Pan-Tilt of the camera to the
Home Position.
* Coordinate of the home position is Pan :
0000, Tilt : 0000. This coordinate cannot be
changed.
Recalls a registered preset.
PresetCall=Value1
[Value1]
The preset number to recall
* Refer to the item "PRESET RUN SPEED" of
CGI Command Setting Values.
* Larger the number, faster.
Clears the preset corresponding to the
specified number.
Registers the parameter setting which
belongs to imaging.cgi to Preset 1.
Sets the name of registered preset.
Specifies one of the registered preset
number on setting.
PresetName=Value1,Value2
Returns all the registered preset name to
the inquiry.
PresetName=Value11,Value21[,Value12,
Value22, ...]
[Value1n]
Preset number
[Value2n]
Preset name
The 32 and less alphanumeric characters
can be set.
Returns the maximum number of preset
that can be registered.
Registers the current pan/tilt/focus/zoom
position and camera settings as a preset
position.
PresetSet=Value1,Value2,Value3
[Value1]
Preset number to register
[Value2] Name
Preset name to register
The 32 and less alphanumeric characters
can be set.
[Value3] Thumbnail
Sets whether to use the current camera
image as a thumbnail
on : Use
off : Not use
Deletes the thumbnail of a registered
preset.