Sony SRG-A40 Command List page 52

Parameter
PanLimitMode
PanMovementRange
PanTiltMaxVelocity
PanTiltReset
PtzfStatus
RampCurve
Set
Value
Inq
Set unlimited, limited
Inq
Inq [Value1]
de00
[Value2]
2200
Inq 24
Set on
Inq [Value1]
idle, moving, unknown
[Value2]
idle, moving, unknown
[Value3]
idle, moving, unknown
[Value4]
idle, moving, unknown
Set 1
Inq
52
Description
Sets the limit mode of the pan's movement
range.
unlimited : A limit does not exist.
limited : Limits in the range which is set
on PanLimit.
Returns the possible movement range of
pan.
PanMovementRange=Value1,Value2
[Value1]
de00 : (Left end)
[Value2]
2200 : (Right end)
* Refer to the item "PAN/TILT POSITION" of
CGI Command Setting Values.
Returns the maximum speed of Pan/Tilt
movement.
Resets the Pan-Tilt position for the camera
to recognize the position correctly and to
control Pan-Tilt.
Returns the current status of pan / tilt /
zoom / focus movement.
PtzfStatus=Value1,Value2,Value3,Value4
[Value1]
Returns the current status of pan.
idle : Idle
moving : Moving
unknown : Abnormal status
[Value2]
Returns the current status of tilt.
idle : Idle
moving : Moving
unknown : Abnormal status
[Value3]
Returns the current status of zoom.
idle : Idle
moving : Moving
unknown : Abnormal status
[Value4]
Returns the current status of Focus.
idle : Idle
moving : Moving
unknown : Abnormal status
Sets the pan/tilt's acceleration and
deceleration curve.