Cleaning The Watch; Cleaning The Leather Bands; Changing The Bands; Viewing Device Information - Garmin LILY 2 Owner's Manual

Cleaning the Watch

CAUTION
Some users may experience skin irritation after prolonged use of the watch, especially if the user has sensitive
skin or allergies. If you notice any skin irritation, remove the watch and give your skin time to heal. To help
prevent skin irritation, ensure the watch is clean and dry, and do not overtighten the watch on your wrist.
NOTICE
Even small amounts of sweat or moisture can cause corrosion of the electrical contacts when connected to a
charger. Corrosion can prevent charging and data transfer.
TIP: For more information, go to www.garmin.com/fitandcare.
1 Rinse with water, or use a damp lint-free cloth.
2 Allow the watch to dry completely.

Cleaning the Leather Bands

1 Wipe the leather bands with a dry cloth.
2 Use a leather conditioner to clean the leather bands.

Changing the Bands

The watch is compatible with 14 mm wide, standard, quick-release bands.
1 Slide the quick-release pin on the spring bar to remove the band.
2 Insert one side of the spring bar for the new band into the watch.
3 Slide the quick-release pin, and align the spring bar with the opposite side of the watch.
4 Repeat steps 1 through 3 to change the other band.

Viewing Device Information

You can view the unit ID, software version, and regulatory information.
1 Press to view the menu.
2 Select > .
3 Swipe to view the information.
30 Device Information