Serial Port Configuration; Configuring Serial Ports; Serial Gateway - ABB ARC600 User Manual

Serial port configuration

8 Serial port configuration
8.1

Configuring serial ports

1.
2.
8.2

Serial gateway

The serial gateway feature enables data from the serial port attached device to be
routed to Ethernet/mobile network (serial over IP) and vice versa. Serial gateway
processes the transmitted data transparently and does not alter it any way except
for buffering it for transmission. Because of the transparent communication, any
protocols can be used in actual communication between nodes.Serial gateway
configuration depends on used protocols.
54
In the left pane, under Serial Port and I/O, click General Configuration.
Select an Application Mode for each serial port.
• Serial Gateway: Transparent connection to any serial device
• IEC-104: IEC-101 to IEC-104 conversion with IEC-101 serial device protocol
• Modbus: Modbus conversion with Modbus/RTU or Modbus/ASCII serial
device protocol
1MRS758459 J
ARC600
User Manual