ABB ARC600 User Manual page 80

Appendix Installation and mounting
instructions
14.3 Installing the SIM card
Standard 3 V SIM cards (2 FF) can be used with the device's IEC 60870-5-104
gateway. A SIM card holder is located on the top panel near the antenna connector.
1.
2.
3.
4.
80
Use a miniature circuit breaker (MCB) to disconnect ARC600 from the
supply. The preferred rating for MCB is 16 A.
If the PIN code query is enabled, check that the correct PIN code is
entered in the ARC600 configurator wireless WAN submenu.
Switch off power from the device.
Eject the SIM card holder by pushing the Eject button.
Remove the tray from the holder and place the SIM card onto the tray.
Insert the tray carefully back to the holder and press the tray until it is locked.
1MRS758459 J
ARC600
User Manual