Table of Contents
Advertisement
Network configuration
Table 22: Routing parameters
Screen
Ethernet WAN
WAN Failover
OpenVPN Client Set-
tings
52
Parameter
Value
Gateway (IP address)
(IP address)
WAN Default Route
Yes
No
On Demand
Yes
No
Primary WAN Inter-
None
face
Mobile WAN
Ethernet WAN
Ethernet WAN
Secondary
Backup WAN Interface None
Mobile WAN
Ethernet WAN
Secondary Backup
None
WAN Interface
Mobile WAN
Ethernet WAN
Ethernet WAN
Secondary
Interface
Any WAN
Ethernet WAN
Wireless WAN
Ethernet LAN
Routing mode
None
Host
Net
Default route
1MRS758459 J
Description
IP address of router
used to reach the in-
ternet. If not used,
the field should be
empty.
Usually "Yes" if the
default route is
defined by "static
routes". "No" is re-
quired if the selection
logic is done on VPN
level.
"Yes" activates the
backup interfaces on-
ly when required. "No"
makes all the WAN
interfaces available si-
multaneously, for ex-
ample, for VPNs.
These three settings
configure the high-
level default gate-
ways. They must be
configured to enable
default route.
This setting defines
which interface to use
for connection.
This setting de-
fines how the rout-
ing is configured
with OpenVPN. See
OpenVPN application
note.
ARC600
User Manual
Advertisement
Table of Contents
